PLC一键控制，液压倾翻卸料的作业方式对路面进行清扫作业。 Isuzu washing and sweeping truck adopts washing, sweeping, suction and mixed methods to collect garbage, wet dust removal, electro-hydraulic PLC one-button control, hydraulic dumping and unloading operation to clean the road.
The auxiliary engine is specially used to drive the fan and hydraulic system to ensure that it can continue to work during driving and the continuity of the cleaning process.
“中置两扫盘+喷雾降尘+中置宽幅吸嘴（内置高压喷杆及两侧高压喷杆）”的结构布局，对泥泞路面有更好的清洁效果，清扫过程中砂石不在飞溅扬尘，此布局便于清扫装置与吸盘的调整与维护，转场作业时整车通过性好。 Adopting the structure layout of "two center-mounted scanning discs + spray dust reduction + center-mounted wide nozzle (built-in high-pressure spray boom and high-pressure spray booms on both sides)", which has a better cleaning effect on muddy roads. The dust is splashed. This layout is convenient for the adjustment and maintenance of the cleaning device and the suction cup.
The transmission between the auxiliary engine and the fan is provided with an automatic clutch, which can ensure the automatic disengagement from the fan when the auxiliary engine is started and stopped at no load, which reduces the impact on the auxiliary engine and improves the reliability and service life of the auxiliary engine.
Automatically avoid the protection function and automatic reset function when encountering obstacles, automatically retract when encountering obstacles, and automatically return over obstacles.
The rotating speed of the scanning disk can be adjusted according to different cleaning conditions, which can ensure a good cleaning effect under various pollution conditions.
。 Adopt advanced and efficient dedicated fan and full floating nozzle that can be leveled automatically with the road surface, good cleaning effect and long service life .
Brief Introduction of Isuzu Washing Car Performance Parameters
Main performance parameter
CLW5100TXSQ5 sweeping truck
Chassis model, category, manufacturer
GB17691-2005 Country Ⅴ, GB3847-2005
Chassis engine model and manufacturer
4HK1-TC51 Qingling Isuzu (Chongqing) Engine Co., Ltd.
Cleaning engine model and manufacturer
B140 Dongfeng Cummins Co., Ltd.
Light diesel 0 (diesel tank shared with chassis)
Dimensions (length x width x height) mm
7430 * 2290 * 2750
Number of tires
7 (including 1 spare tire)
Front wheel (mm)
Rear wheel (mm)
Front / rear suspension (mm)
Ground clearance (mm)
Rated load (kg)
Curb weight (kg)
Total weight (kg)
Specific performance parameters
3 ) Trash bin volume (m 3 )
6 (stainless steel)
3 ) Clear water tank volume (m 3 )
5 (stainless steel)
Cleaning width (mm)
Cleaning speed (km / h)
Cleaning speed (km / h)
2 /h) Cleaning capacity (m 2 / h)
3 ) Density (g / cm 3 )
Suction particle size (mm)
Dump bin dumping angle
Work noise (db)
< 88 In accordance with GB7258
Driving performance parameters
4 ¡Á 2 rear axle drive
Number of leaf springs (front / rear)
8/10 + 7
Double circuit air brake, drum type
Braking distance (30km / h at full load)
10m ≤ 10m
Maximum speed (km / h)
Minimum turning radius (m)
Single-plate dry diaphragm spring clutch, hydraulically operated
Mechanical 5-speed transmission with synchronizer, manual
Engine fuel consumption
Driving (L / 100km)
Operation (L / h)
2 ) Operation (L / 10000m 2 )
12 ≤ 12
6 ≤ 6
3 ≤ 3
Dust reduction system
Water spray form
Low pressure mist
Main component composition
High-pressure pumps, water filters, pipes, stainless steel spray racks, high-pressure nozzles, etc. imported from Germany
High pressure pumps
Left and right sweep
Inside of suction cup
Electronic control, one-button operation
Open type, electric control centralized operation
泵 等 Gear pump, cycloid motor, hydraulic cylinder, solenoid valve, manifold, high pressure pump, etc.
Huibo Hydraulic Cylinder
Hydraulic cylinder seal
Solenoid valve group
Hiprius (Sino-Italian joint venture)
Shockproof pressure gauge
Oil return filter
System overflow pressure
Hydraulic oil tank volume
It consists of the chassis vehicle circuit, the auxiliary engine electrical part, and the operation control circuit of the special working device.
Chassis system voltage (V)
Working device system voltage (V)
Panel of electric control box
Auxiliary machine tachometer, auxiliary machine water temperature meter, oil temperature alarm device, various operation control switches
Shanghai Schneider (Sino-French joint venture)
Programmable logic controller
12V-70A.H (2 in parallel)
Dedicated high pressure centrifugal fan
Luoyang North Slope Fan
Rated working speed
r / min
Auxiliary engine, clutch, high temperature A belt drive with teeth (4)
Centrifugal, imported materials, two-year warranty, service life up to 20,000 working hours
( m 3 /h ) Air volume ( m 3 / h )
5000 ~ 7800
[Technical parameters of Isuzu washing car]
(Kg) Total weight (Kg)
(m3) Tank volume (m3)
(Kg) Rated load (Kg)
(mm) Dimensions (mm)
2290¡Á 2750 7430 ¡Á 2290 ¡Á 2750
(Kg) Curb weight (Kg)
(mm) Cargo compartment size (mm)
(人) Rated passenger (person)
(人) Cab number of passengers (person)
(Kg) Maximum load of saddle (Kg)
/离去角(¡ã) Approach / departure angle (¡ã)
/后悬(mm) Front / rear suspension (mm)
(Kg) Axle load (Kg)
(Km/h) Maximum speed (Km / h)
The special device is composed of a dustbin, a suction nozzle assembly, a cleaning device, a fan, etc., and performs cleaning, cleaning and other operations on the road surface. The left and right side protective devices interfere with the working device (suction nozzle, sweeping brush, etc.) and are replaced by the working device, so it is exempted.The rear lower protective material is Q235A carbon steel, which is welded to the auxiliary beam.The cross-sectional size is 50 ¡Á 120 (mm ), 360mm from the ground. The ABS and controller model is: APG3550500H1, the manufacturer is: Zhejiang Asia-Pacific Mechanical and Electrical Co., Ltd.
底盘技术参数】 [ Chassis technical parameters]
Qingling automobile co., Ltd.
Number of axes
Number of tires
235 / 75R17.5 14PR
Number of leaf springs
8/10 + 6
(mm) Front track (mm)
(mm) Rear track (mm)
GB17691-2005 Country Ⅴ, GB3847-2005
(ml) Displacement (ml)
(Kw) Power (Kw)
Qingling Isuzu (Chongqing) Engine Co., Ltd.
底盘参数：采用五十铃700P底盘，4175mm 轴距， 五十铃190 马力发动机 ，五十铃700P驾驶室，五十铃MLD 六档变速器， 235/75R17.5 轮胎。 ISUZU chassis: Isuzu 700P chassis, 4175mm wheelbase, Isuzu 190 horsepower engine , Isuzu 700P cab, Isuzu MLD six-speed transmission, 235 / 75R17.5 tires. 4 吨，后桥 7 吨，带 ABS ，断气刹，驾驶室可翻转 ，加装电子水炮。 With air conditioning, with direction assistance, 4 tons on the front axle , 7 tons on the rear axle , with ABS , air brake, the cab can be flipped , and an electronic water cannon is installed. Produce strictly according to the announced size.
上装参数:6方尘罐/5方水罐.中置 2扫盘、三洋马达、德国原装进口高压水泵（前冲\侧喷\中喷\后喷雾\侧冲洗车水枪|垃圾箱自洁 ）、万向高压路沿清洗、低压泵前冲、不锈钢水箱、垃圾箱；不锈钢高压管路、施耐德控制开关、美国传感器；尾部 LED箭头灯、机油、垃圾箱、水箱均带防溢或低水位报警装置；倒车及洗扫状态室内监视器、20m高压冲洗卷盘、* 大清扫宽度3.5m；高压冲洗高度≥21m。 11 ton Isuzu washing and sweeping vehicle loading parameters: 6 square dust tanks / 5 square water tanks. The center is equipped with 2 sweep disks, Sanyo motors, and high pressure water pumps imported from Germany | Dustbin self-cleaning ), universal high pressure roadside cleaning, low pressure pump forward flush, stainless steel water tank, trash can; stainless steel high pressure pipeline, Schneider control switch, American sensor; tail LED arrow lights, oil, trash can, water tank all Anti-overflow or low water level alarm device; indoor monitor for reverse and cleaning status, 20m high-pressure flushing reel, maximum cleaning width of 3.5m; high-pressure flushing height ≥21m. The vehicle comes standard. Chassis warranty manual, on-board tools, certificate of conformity.
Why do friends who buy road sweepers, sweepers, and vacuum cleaners trust Chengli sweepers? The reasons are as follows:
程力 洗扫车厂家是国内 500 强企业，湖北省百强企业名列第三名，实力雄厚，而且公司注册商标 “ 程力威牌 ” 已被评为 “ 弛* 商标 ” ，品牌值得您信赖！ I. Brand ringing: Chengli washing truck manufacturers are among the top 500 domestic enterprises, and the top 100 enterprises in Hubei Province rank third, with strong strength, and the company's registered trademark " Chengliwei Brand " has been rated as " Chi * Trademark " , the brand You can trust! 500 强 Chengli road sweeper manufacturers top 500
程力五十铃洗扫车厂家已标资质，所有扫路车严格按照 公告 生产、质检，品质值得您信赖！ Second, high quality: Chengli Isuzu washing and car manufacturers have been qualified, all road sweepers are strictly in accordance with the announcement of production, quality inspection, quality you can trust!
程力 洗扫车厂家注册资金 1 亿元整， 3000 余亩，在册员工 8000 余人，拥有 500 多人的技术研发团队和国内的扫路车生产线，程力所有扫路车都采用化装配，不仅装配效率高，整车更美观，而且故障率远低于装配，用户用起来更省心，装配值得您信赖！ Third, the strength: Chengli washing car manufacturers registered capital of 100 million yuan, more than 3,000 acres, more than 8,000 registered employees , has more than 500 technical research and development team and domestic road vehicle production line, all road vehicles in Chengli Adopting chemical assembly, not only has high assembly efficiency, the vehicle is more beautiful, but also has a much lower failure rate than assembly. Users can use it more worry-free, and assembly is worthy of your trust!
Chengli Special Purpose Vehicle Co., Ltd. Road Sweeper Specialty Factory
洗扫车 销售经理： Cheng Li washing car sales manager: 施经理（微信同号） 138 8688 0570 Manager Shi (same account on WeChat)
1011932860 Business Card : 1011932860
After-sales service for washing car accessories Tel: 139 9787 2894 (same number on WeChat)
Address: Chengli Automobile Industrial Park, Suizhou City, Hubei Province
441300 Postcode : 441300