五十铃洗扫车 整车技术参数 】 [ Technical Parameters of Isuzu Washing Vehicle ]
Isuzu washing car
洗扫车 Isuzu washing car
Total weight (kg)
Tank volume (m3)
Rated mass (kg)
Curb weight (kg)
Cargo compartment size (mm)
Rated passenger (person)
Total mass of quasi-trailer (kg)
Cab number of passengers (person)
* 大载质量(kg) Saddle seat * large load (kg)
Approach / departure angle (¡ã)
Front / rear suspension (mm)
Axle load (kg)
高车速(km/h) * High speed (km / h)
五十铃洗扫车 底盘技术参数】 [ Technical parameters of ISUZU chassis
Qingling automobile co., Ltd.
Number of axes
Number of tires
7.00-16 14PR, 7.00R16 14PR
Number of leaf springs
8/6 + 5
Front track (mm)
Rear track (mm)
GB17691-2005 Country Ⅴ, GB3847-2005
Qingling Isuzu (Chongqing) Engine Co., Ltd.
Qingling Isuzu (Chongqing) Engine Co., Ltd.
经理 Manager Shi
@qq.com 1011932860 @ qq.com
8 86 88 0570 13 8 86 88 0570
Chengli Special Purpose Vehicle Co., Ltd.
Isuzu car wash parameters: 4 square water / 5 square dust tank, Isuzu 5-speed transmission, with air conditioning, 7.00R16 steel tires, 2.5 tons on the front axle and 4.8 tons on the rear axle. Double circuit oil brake. Isuzu's 130-horsepower engine and Kangji's 140-horsepower sub-engine.
中置2扫盘，三洋马达，德国原装进口高压水泵（前冲/侧喷/中喷/后喷雾/侧冲洗车水枪/垃圾箱自洁装置）.万向高压路沿清洗，低压泵前冲。 ISUZU washing and cleaning vehicle configuration: 2 sets of central scanning plate, Sanyo motor, high pressure water pump imported from Germany Cleaning along, the low pressure pump is flushed forward. Stainless steel water tank, trash can, stainless steel high-pressure pipeline, Schneider control switch, American sensor; tail LED arrow light, oil, trash can, water tank are equipped with anti-flooding low water level alarm device. Indoor monitor for reversing and cleaning status, 18m high-pressure washing reel, maximum cleaning width 3.5 meters, high-pressure washing height ≧ 21 meters.
Isuzu car washing function introduction
采用洗，扫，吸，混合的方式收集垃圾，湿式除尘、电液 PLC一键控制，液压倾翻卸料的作业方式对路面进行清扫作业。 1. Isuzu washing and sweeping truck adopts washing, sweeping, suction and mixed methods to collect garbage, wet dust removal, electro-hydraulic PLC one-button control, hydraulic dumping and unloading operation to clean the road.
2. The auxiliary engine is specially used to drive the fan and hydraulic system to ensure that it can continue to work during driving and ensure the continuity of the cleaning process.
“中置两扫盘+喷雾降尘+中置宽幅吸嘴（内置高压喷杆及两侧高压喷杆）”的结构布局，对泥泞路面有更好的清洁效果，清扫过程中砂石不在飞溅扬尘，此布局便于清扫装置与吸盘的调整与维护，转场作业时整车通过性好。 3. Adopting the structure layout of "two center-mounted scanning discs + spray dust reduction + center-mounted wide nozzle (built-in high-pressure boom and high-pressure booms on both sides)", which has a better cleaning effect on muddy roads. The stone is not splashing with dust, this layout is convenient for the adjustment and maintenance of the cleaning device and the suction cup, and the vehicle has good passability during the transition operation.
4. The transmission between the auxiliary engine and the fan is equipped with an automatic clutch, which can ensure the automatic disengagement of the auxiliary engine from the fan when it is started and stopped at no load, which reduces the impact on the auxiliary engine and improves the reliability and use of the auxiliary engine. life.
过障碍自动回位。 5. Automatically avoid the protection function and automatic reset function when encountering obstacles, automatically retract when encountering obstacles, and automatically return over obstacles.
6. The rotating speed of the scanning disc can be adjusted according to different cleaning conditions to ensure a good cleaning effect under various pollution conditions.
7. Isuzu washing and sweeping car adopts the first and most effective special fan and the fully floating suction nozzle that can be leveled automatically with the road surface. The cleaning effect is good and the service life is long.Isuzu scrubbers are widely used in the mechanized cleaning of urban roads, highways, airports, terminals, bridges, squares, and communities.
程力洗扫车 流程 ： Purchasing force cleaning car process :
One. Step * Telephone negotiation: negotiate by phone or on-site inspection
2. The second step is to sign the contract: sign the order and sales contract: pay the contract deposit in advance
3. The third step is to arrange production: the chassis is extracted according to the contract model, and the production is arranged.
Fourth, the fourth step of delivery acceptance: vehicle delivery acceptance, pay the remaining balance of the vehicle
V. Step 5 Signature and Confirmation: The buyer needs to stamp and sign the delivery slip to confirm that the received vehicle is intact and complete the procedures (only for delivery vehicles)
Company Name: Chengli Special Purpose Vehicle Co., Ltd.
Chengli washing car sales hotline: 13868880570 Manager Shi (same number on WeChat)
（微信同号） After-sales hotline for cleaning car accessories: 13997872894 Manager Lin (same number on WeChat )
Washing car manufacturers business QQ: 1011932860
Company Address: Gangcheng Automobile Industrial Park, Plain, South Suburb, Suizhou City, Hubei Province
洗扫车 厂家热线：13886880570 施经理 加微信13886880570发洗扫车视频及洗扫车报价 Welcome to consult Chengli washing car manufacturers hotline: 13868880570 Manager Shi plus WeChat 13868880570 hair washing car video and washing car quote