Picture of National Six Isuzu Road Sweeper
[Technical Parameters of Isuzu National Sixth Sweeper]
National Six Road Sweeper
扫路车 Isuzu road sweeper
Total weight (kg)
Tank volume (m3)
Rated mass (kg)
Curb weight (kg)
Cargo compartment size (mm)
Rated passenger (person)
Total mass of quasi-trailer (kg)
Cab number of passengers (person)
* 大载质量(kg) Saddle seat * large load (kg)
Approach / departure angle (¡ã)
Front / rear suspension (mm)
Axle load (kg)
高车速(km/h) * High speed (km / h)
[Chassis technical parameters of Isuzu national six sweeper]
Qingling automobile co., Ltd.
Number of axes
Number of tires
7.00R16 14PR, 7.00-16 14PR
Number of leaf springs
8/6 + 5
Front track (mm)
Rear track (mm)
GB3847-2005, GB17691-2018 Country Ⅵ
Qingling Isuzu (Chongqing) Engine Co., Ltd.
车参数 ：采用国六排放标准的五十铃底盘，120马力五十铃发动机，7.00轮胎，原装空调，ABS。 National 6 Isuzu car cleaning parameters : Isuzu chassis with national 6 emission standards, 120 horsepower Isuzu engine, 7.00 tires, original air conditioning, ABS.
.5方 五十铃扫路车 参数 ：水箱1.5方，垃圾箱4方。 5.5 square Isuzu road sweeper parameters : 1.5 square water tank, 4 square waste bin. 大功率风机 。 With 4 sweep disks, JMC 77 horsepower sub-engine, high-power fan . Sanyo Motor, Schneider Control Switch, High Pressure Solenoid Valve Group, Continuously Variable Automatic Clutch, Maintenance-free Centrifugal Automatic Fan, Stainless Steel Trash Can, Zoomlion Polaris Electronic Water Pump, Rear LED Arrow Indicator, Manual Pump Emergency System, Waste Lift Dump function.
The ground clearance of the suction nozzle of the road sweeper is ensured by the rubber wheel or the sliding shoe contacting the ground machine and profiling the ground. 滑靴不能着地，从而导致吸嘴离地间隙变大而影响清扫效果，出现清扫效果不稳定现象。 However, during the cleaning operation, because of uneven road surface, a certain rubber wheel or slipper cannot land, which causes the gap between the suction nozzle and the ground to be enlarged, which affects the cleaning effect, and the cleaning effect is unstable.
Structure of road sweeper:
1. High reliability: The chassis is known domestically and complies with national emission standards. The upper part has a compact and reasonable structure, stable performance and long life.
2. Comfortable and safe driving: The vision in the cab is wide, and the operation is simple and comfortable.
3. Energy saving and environmental protection: The chassis and the auxiliary engine all meet the requirements of the national six emission standards. The auxiliary engine is equipped with an automatic clutch device imported from Germany to ensure the no-load start of the auxiliary engine and the fan to smoothly engage and run, thereby making the vehicle work noise. Low and reduce operating fuel consumption.
4. High cleaning efficiency: The unique structure design enables the combination of cleaning and suction systems to ensure high cleaning and suction efficiency.
5. The cleaning system is reasonable first: the main brush has an anti-collision avoidance function, and is driven by an imported motor. The power is strong and the speed can be adjusted steplessly.
6. Control system: Highly integrated electro-hydraulic control. All cleaning actions are completed by hydraulic pressure, and centralized control is realized in the cab.
外的环境设计，国外路面垃圾相对来说没有国内的这么严重。 And the road sweepers sold abroad are of course designed according to the foreign environment, and foreign road garbage is not as serious as domestic ones. So imported road sweepers are not so easy to use in China. 程力扫路车 厂家 生产扫地车系列有：湿式扫路车、道路洗扫车 、 干式吸尘车 、电动扫地机。 At present , Chengli road sweeper manufacturers produce sweepers: wet sweepers, road sweepers , dry vacuum cleaners , and electric sweepers. Among them are: Dongfeng Furika Road Sweeper, Futian Road Sweeper, Isuzu Road Sweeper, Dongfeng Dorica Road Sweeper, Sanitation Small Sweeper, Guoli Road Sweeper and so on. These road sweepers can be fully applied in various environments.
Road sweeper function introduction
扫路车 采用吸扫混合的方式收集垃圾，湿式除尘、电液控制，液压倾翻卸料的作业方式对路面进行清扫作业。 1. Road sweeper adopts suction-sweep mixing method to collect garbage, wet dust removal, electro-hydraulic control, hydraulic dumping and unloading to clean the road.
扫路车 采用副发动机专门驱动风机和液压系统，保证行驶过程中能继续工作，保证清扫过程的连续性。 2. The road sweeper uses the auxiliary engine to drive the fan and hydraulic system to ensure that it can continue to work during driving and to ensure the continuity of the cleaning process.
3. 让清扫过程中砂石不在飞溅扬尘，此布局便于清扫装置与吸盘的调整与维护，转场作业时整车通过性好。 Adopting the structure layout of "four center sweeping discs + spray dust reduction device + center partition + rear suction nozzle", so that sand and gravel are not splashing during the cleaning process. This layout is convenient for the adjustment and maintenance of the cleaning device and suction cups, and for transfer operations. The vehicle has good passability.
. 4 . 机的冲击，提高了副发动机的工作可靠性和使用寿命。 The transmission between the auxiliary engine and the fan is provided with an automatic clutch, which can ensure the automatic disengagement from the fan when the auxiliary engine is started and stopped at no load, which reduces the impact on the auxiliary engine and improves the working reliability and service life of the auxiliary engine. .
5. Automatically avoid the protection function and automatic reset function when encountering obstacles, automatically retract when encountering obstacles, and automatically return over obstacles.
6. 况 来调整转速，能保证在各种污染状况下都有良好的清扫效果 The rotating speed of the scanning disc can be adjusted according to various cleaning conditions , which can ensure a good cleaning effect under various pollution conditions.
7. ，高* 的专用风机和可随路面自动找平的全浮动式吸嘴，清扫效果好，使用寿命长。 Adopting the first and the highest special fan and the full floating nozzle that can be leveled automatically with the road surface, the cleaning effect is good and the service life is long.